Articles on: Showcase & Demo

MODDIY Premium Silver Wire Cables

This style is the simplicity and elegant style using premium high-performance silver-plated wires with the best interference protection, most suitable for Audio Grade PC.

High Conductivity: Silver is an excellent electrical conductor, surpassing even copper. When silver plating coats copper wire, it significantly enhances overall conductivity, ensuring reliable signal transmission.

Corrosion Resistance: Silver-plated copper wires are more resistant to corrosion than regular copper wires. This property ensures longevity and minimizes the need for frequent replacements.

Durability: The combination of silver’s durability and copper’s structural integrity results in robust cables that withstand wear, unplugging, and physical stress.

Low Coefficient of Thermal Expansion (CTE): Silver-plated wires expand less under heat compared to pure copper, reducing stress on connections and enhancing long-term reliability.

Versatility: Silver plating allows for thinner layers, making these cables suitable for high-density circuit boards with limited space.

In summary, Premium Silver Wire Cables offer superior performance, making them an excellent choice for applications requiring high conductivity, interference protection, and corrosion resistance.







FormD T1: E-White meets Vertical Stand & TG Panel



PSU Cables: ModDIY Blue Wire Custom Cables PSU Cable Length: EPS 300mm | 12VPWR 350mm | 24-pin 150mm (Color = Transparent Blue)

FormD T1 v2 | Modultra Lobo | 13900k | 4090 FE | SF1000L



New Type 5 Corsair SF1000L 24 Pin - 18cm EPS / CPU 8/8 Cable - 30cm 12VHPWR to 2x8 - 35cm Sata - 1x Sata connector only - 15cm Molex - 1x Molex connector only - 15cm (Color = Transparent Blue)

Dual 280 Rad Dan C4 SFX



Custom cables from Moddiy (Color = Transparent Blue)

Out with the old in with the new



Main 24pin = 60cm, CPU 8pin = 60cm, 12VHPWR 16pin = 60cm, SATA 5pin = 10cm (Color = Silver)

Build Complete - T1: Two Tone



PSU Cables: ModDiy Blue Premium Cables (Color = Transparent Blue)

FormD T1 V2.5 Build for Simulation/Engineering/Occasional Gaming



(Color = Transparent Red)

Dusted off the old NR200P and gave it a modern day build!



I’ve also used these for the CH160, T1, Fractal Terra, Fractal Mood and A4 H2O. 24-pin (150mm)(15cm), EPS/CPU (300mm) (30cm) and 12VHPWR (350mm) (35cm) (Color = Transparent Blue)

Corsair H100i LCD X FormD T1



(Color = Transparent Blue)

Stickerbombed gaming build



(Color = Transparent Blue)

Ncase M2 build



Corsair SF850 with MODDIY custom silver wire cables (Color = Silver)

Updated on: 29/10/2024

Was this article helpful?

Share your feedback

Cancel

Thank you!